View publications by subject:

A. Ergun, R. Chung, D. Ward, A. Valdevit, A. Ritter, D. M. Kalyon, "Unitary bioresorbable cage/core bone graft substitutes for spinal arthrodesis coextruded from polycaprolactone biocomposites", Annals of Biomedical Engineering, 40, 5, 1073-1087, (2012).

K. B. Shepard, H. Gevgilili, D. M. Kalyon, F. T. Fisher, M. Ocampo, and J. Li, "Viscoelastic behavior of poly(ether imide) incorporated with multi-walled carbon nanotubes", Journal of Polymer Science Part B: Polymer Physics, Vol. 50, 15041514, DOI 10.1002/polb.23151, (2012).

S. F. Bartolucci, G. Mago, F. T. Fisher, E. Troiano, D. M. Kalyon, "Unusual fracture surface morphology of fatigued carbon nanofiber/poly (ether ether ketone) composites", Carbon, 5023472374, (2012).

D. Kalyon and M. Malik, "Axial laminar flow of viscoplastic fluids in a concentric annulus subject to wall slip", Rheologica Acta, Vol. 51, 805820, DOI 10.1007/s00397-012-0641-y, (2012).

Asli Ergun, Xiaojun Yu, Antonio Valdevit, Arthur Ritter and Dilhan M. Kalyon, "Radially and axially-graded multi-zonal scaffolds targeting critical-sized bone defects from polycaprolactone/hydroxyapatite/tricalcium phosphate", Tissue Engineering Part A, Vol. 18, 23/24, (2012).

S. Senturk-Ozer, D. Ward, H. Gevgilili and D. Kalyon, "Dynamics of electrospinning of poly(caprolactone) via hybrid twin screw extrusion and electrospinning and properties of electrospun fibers", Polymer Engineering and Science, Vol. DOI 10.1002/pen.23389, (2012).

H. T. Kahraman, H. Gevgilili, E. Pehlivan and D. M. Kalyon, "Dispersion of nanoclays into a thermosetting binder employing ultrasonication and intensive mixing methods", J. Applied Polymer Science, Vol. DOI: 10.1002/app.38867, (2012).

D. Kalyon, "Chemical engineering approaches to the design and fabrication of extrusion-based functionally graded scaffolds targeting tissue engineering applications", Proceedings of AICHE National Meeting, Pittsburgh, (2012).

D. Kalyon, H. Gevgilili and H. Tang, "Squeeze flow rheometry", Proceedings of AICHE National Meeting, Pittsburgh, (2012).

H. Gevgilili, D. Kalyon, E. Birinci, M. Malik, L. Goovaerts, R. Bacon and P. Mort, "Dynamic assembly of anionic surfactant into highly-ordered vesicles", Journal of Colloids and Interface Science, 356, 579-588 , doi:10.1016/j.jcis.2011.01.011, (2011).

A. Ergun, D. Kalyon, A. Valdevit, A. Ritter , X. Yu, "Twin screw extrusion and co-extrusion based fabrication of uniform and multilayered scaffolds for bone tissue engineering", Orthopaedic Research Society, Transactions, Vol. 36, 0285, (2011).

A. Ergun, D. Kalyon, A. Valdevit and A. Ritter, "Compressive fatigue behavior of osteoblast seeded tissue constructs of poly(caprolactone) multilayered scaffolds for bone graft substitute applications", Orthopaedic Research Society, Transactions, Vol. 36, 1850, (2011).

C. Erisken, D. Kalyon, C. Ornek, H. Wang and J. Xu, "Osteochondral tissue formation through adipose-derived stem cell differentiation using biomimetic tissue scaffolds with graded stimulator concentrations", Tissue Engineering: Part A, 17, Numbers 9 and 10, 1239-1252, doi:10.1089/ten.TEA.2009.0693, (2011).

A. Ergun, X. Yu, A.Valdevit, A. Ritter and D. M. Kalyon, "In vitro analysis and mechanical properties of twin screw extruded single-layered and co-extruded multi-layered poly (caprolactone) scaffolds seeded with human fetal osteoblasts for bone tissue engineering", J. Biomedical Materials Research Part A, 999A,1-13, (2011).

G. Mago D. Kalyon and F. Fisher, "Nanocomposites of polyamide-11 and carbon nanostructures: Development of microstructure and ultimate properties following solution processing", Journal of Polymer Science Part B: Polymer Physics, 49, 1311-1321, (2011).

S. Senturk-Ozer, H. Gevgilili and D. Kalyon, "Biomass pretreatment strategies via control of rheological behavior of biomass suspensions and reactive twin screw extrusion processing", Bioresource Technology, 102, 9068-9075, (2011).

S. Ozkan, D. Kalyon and X. Yu, "Functionally graded β-TCP/PCL nanocomposite scaffolds for bone tissue engineering: In vitro evaluation with human fetal osteoblast cells", Journal of Biomedical Materials Research - Part A, Vol. 92, 3, doi: 10.1002/jbm.a.32425, 1007-1018, (2010).

C. Erisken, D. Kalyon and H. Wang, "Viscoelastic and biomechanical properties of tissue engineered constructs for osteochondral tissue regeneration", J. Biomechanical Engineering, Vol. 132, 091013-9, doi:10.1115/1.4001884, (2010).

S. Vural, K. Dikovics and D. Kalyon, "Crosslink Density, Viscoelasticity and Swelling of Hydrogels as affected by Dispersion of Multi-walled Carbon Nanotubes", Soft Matter, Vol. 6, doi: 10.1039/c0sm00099j, 3870-3875, (2010).

D. Kalyon, "An Analytical Model for Steady Coextrusion of Viscoplastic Fluids in Thin Slit Dies With Wall Slip", Polymer Engineering and Science, Vol. 50, 4, doi: 10.1002/pen.21580, 652-664, (2010).

G. Mago, D. Kalyon and F. T. Fisher, "Processing induced crystallization of semicrystalline polymer nanocomposites", Proceedings of Society for the Advancement of Material and Process Engineering, SAMPE 2010, May 17-20, Seattle, WA , (2010).

S. H. Modi, K. B. Dikovics, H. Gevgilili, G. Mago, S. Bartolucci, F. T. Fisher and D. M. Kalyon, "Effects of carbon nanofibers on the thermo-oxidative degradation of poly(ether ether ketone)", Polymer, Vol. 51, doi: 10.1016/j.polymer.2010.08.060, 5236-5244, (2010).

N. Degirmenbasi, S. Ozkan, D. Kalyon and X. Yu, "Surface patterning of poly (L-lactide) upon melt processing: in vitro culturing of fibroblasts and osteoblasts on surfaces ranging from highly crystalline with spherulitic protrusions to amorphous with nanoscale indentations", Journal of Biomedical Materials Research A, Vol. 88A (1), doi: 10.1002/jbm.a.31874, 94-104 , (2009).

D. H. Moon, M. Wazne, A. Koutsospyros, C. Christoudoulatos, H. Gevgilili, M. Malik and D. M. Kalyon, "Evaluation of the treatment of chromite ore processing residue by ferrous sulfate and asphalt emulsion", Journal of Hazardous Materials, Vol. 166, 27-32, (2009).

G. Mago, F. T. Fisher and D. Kalyon, "Polymer crystallization and precipitation-induced wrapping of carbon nanofibers with PBT", Journal of Applied Polymer Science, Vol. 114, 1312-1319, (2009).

G. Mago, F. T. Fisher and D. Kalyon, "Deformation-induced crystallization and associated morphology development of carbon nanotube-PVDF nanocomposites", Journal of Nanoscience and Nanotechnology, Vol. 9, 5, 3330-3340, (2009).

N. Boz, N. Degirmenbasi and D. Kalyon, "Conversion of Biomass to fuel: Transesterification of vegetable oil to biodiesel using KF loaded nano-γ-Al2O3 as catalyst", Applied Catalysis B: Environmental, Vol. 89, 590-596, (2009).

S. Ozkan, D. M. Kalyon, X. Yu, C. McKelvey and M. Lowinger, "Multifunctional polycaprolactone (PCL) scaffolds integrated for controlled release and tissue engineering: In vitro evaluation of released protein secondary structure stability, release profile and biocompatibility", Biomaterials, Vol. 30, doi:10:1016/j.biomaterials.2009.04.050 , 4336-4347, (2009).

S. F. Bartolucci, G. Mago, H. Gevgilili, S. Vural, K. Dikovics, D. M. Kalyon and F. Fisher, "Investigation of the PEEK-Nanotube Composites Prepared by Solution Methods", Proceedings of IMECE2009 ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, November 13-19, 2009, (2009).

G. Mago, C. Velasco-Santos, A. L. Martinez-Hernandez, D. M. Kalyon and F. F. Fisher, "Effect of functionalization on the crystallization behavior of MWNT-PBT nanocomposites", Material Research Society Symp. Proc., Vol. 1056, 1056-HH11-35, (2008).

H. Tang and D. M. Kalyon, "Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip", J. Rheology, Vol. 52, 2, doi.org/10.1122/1.2837104, (2008).

C. Erisken, D. Kalyon and H. Wang, "A hybrid twin screw extrusion/electrospinning method to process nanoparticle-incorporated electrospun nanofibers", Nanotechnology, Vol. 19, doi:10.1088/0957-4484/19/16/165302, (2008).

H. Gevgilili, D. Kalyon and A. Shah, "Processing of energetics in continuous shear roll mills", Journal of Energetic Materials, Vol. 26, 29-51, (2008).

G. Mago, D. M. Kalyon and F. T. Fisher, "Membranes of Polyvinylidene fluoride (PVDF) and PVDF Nanocomposites with Carbon Nanotubes via Immersion Precipitation", Journal of Nanomaterials, Vol. 2008, article ID 759825, 8 pages, (2008).

G. Mago, F. T. Fisher and D. M. Kalyon, "Effects of multiwalled carbon nanotubes on the shear-induced crystallization behavior of poly (butylene terephthalate)", Macromolecules, Vol. 41 (21), doi: 10.1021/ma8008838, (2008).

C. Erisken, D. M. Kalyon and H. Wang, "Functionally and continuously graded electrospun polycaprolactone and -tricalcium phosphate nanocomposites for interface tissue engineering applications", Biomaterials, Vol. 29, doi:10.1016/j.biomaterials.2008.06.022, (2008).

H. S. Tang and D. M. Kalyon, "Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: Ramifications on development of flow instabilities", Journal of Rheology, Vol. 52, 5, doi.org/10.1122/1.2955508, (2008).

M. Allende, D. Fair, D. Kalyon, D. Chiu and S. Moy, "Development of particle concentration distributions and burn rate gradients upon shear-induced particle migration during processing of energetic suspensions", Journal of Energetic Materials, Vol. 25, 49- 67, (2007).

S. Ozkan, H. Gevgilili, D.M. Kalyon, J. Kowalczyk, and Mark Mezger, "Twin screw extrusion of nano-alumina based simulants of energetic formulations involving gel based binders", Journal of Energetics Materials, Vol. 25, 3, 173-201, (2007).

E. Demirkol and D. Kalyon, "Batch and continuous processing of polymer layered organoclay nanocomposites", Journal of Applied Polymer Science, Vol. 104, 1391-1398, (2007).

D. Kalyon and M. Malik, "An integrated approach for numerical analysis of coupled flow and heat transfer in co-rotating twin screw extruders", International Polymer Processing,, Vol. 22, 293-302, (2007).

D. Kalyon and H. Tang, "Inverse problem solution of squeeze flow for parameters of generalized Newtonian fluid and wall slip", Journal of Non-Newtonian Fluid Mechanics, Vol. 143, 133-140, (2007).

G. Mago, J. A. Dutreuil, F.T. Fisher, and D.M. Kalyon, "Structural formation in poly(butylene terephthalate) and PBT nanocomposites during uniaxial deformation", Proceedings of the ASME International Mechanical Engineering Conference and Exposition (IMECE), November 11-15, Seattle, WA, (2007).

C. Feger, M. McGlashan-Powell, I. Nnebe, and D. M. Kalyon, "Rheology and stability of highly filled thermal pastes", Proceedings of the International Microelectronics and Packaging Society, (2006).

D. Kalyon, D. Dalwadi, M. Erol, E. Birinci and C. Tsenoglu, "Rheological Behavior of Concentrated Suspensions as affected by the Dynamics of the Mixing Process", Rheologica Acta, Vol. 45, 641-658, (2006).

N. Degirmenbasi, D. Kalyon and E. Birinci, "Biocomposites of Nanohydroxyapatite with Collagen and Poly(vinyl alcohol)", Colloids and Surfaces B Biointerfaces, Vol. 48, 42-49, (2006).

E. Birinci and D. Kalyon, "Development of extrudate distortions in poly(dimethyl siloxane) and its suspensions with rigid particles", Journal of Rheology, Vol. 50, 313-326, (2006).

Z. Peralta-Inga, N. Degirmenbasi, U. Olgun, H. Gocmez and D. M. Kalyon, "Recrystallization of CL-20 and HNFX from Solution for rigorous Control of the Polymorph type: Part I, Mathematical Modeling using Molecular Dynamics Method", Journal of Energetic Materials, Vol. 24, 69-101, (2006).

N. Degirmenbasi, Z. Peralta-Inga, U. Olgun, H. Gocmez and D. M. Kalyon, "Recrystallization of CL-20 and HNFX from Solution for rigorous Control of the Polymorph type: Part II, Experimental Studies", Journal of Energetic Materials, Vol. 24, 103-139, (2006).

R. Schefflan, S. Kovenklioglu, D. Kalyon, M. Mezger and M. Leng, "Formation of aluminum nanoparticles upon condensation from vapor phase for energetic applications", Journal of Energetic Materials, Vol. 24, 141-156, (2006).

E. Birinci, H. Gevgilili, D. Kalyon, B. Greenberg, D. Fair and A. Perich, "Rheological characterization of nitrocellulose gels", Journal of Energetic Materials, Vol. 24, 247-269, (2006).

R. Schefflan, S. Kovenklioglu, D. Kalyon, P. Redner and E. Heider, "Mathematical model for a fed-batch process for energetic crystals to achieve targeted size distributions", Journal of Energetic Materials, Vol. 24, 157-172, (2006).

D. Kalyon, H. Gevgilili, J. Kowalczyk, S. Prickett and C. Murphy, "Use of adjustable-gap on-line and off-line slit rheometers for the characterization of the wall slip and shear viscosity behavior of energetic formulations", Journal of Energetic Materials, Vol. 24, 175-193, (2006).

G. Mago, F.T. Fisher, and D.M. Kalyon, "Effect of shearing on the crystallization behavior of poly(butylene terephthalate) and PBT nanocomposites", Proceedings of ASME International Mechanical Engineering Conference and Exposition (IMECE), (2006).

D. Kalyon, H. Tang and B. Karuv, "Squeeze flow rheometry for rheological characterization of energetic formulations", Journal of Energetic Materials, Vol. 24, 195-202, (2006).

D. Kalyon, "An overview of the rheological behavior and characterization of energetic formulations: Ramifications on safety and product quality", Journal of Energetic Materials, Vol. 24, 213-245, (2006).

R.Yazici, D.Kalyon, "Microstrain and defect analysis of CL-20 crystals by novel X-ray methods", Journal of Energetic Materials, Vol. 23, 1, 43-58, (2005).

Dilhan M. Kalyon, "Apparent slip and viscoplasticity of concentrated suspensions", Journal of Rheology, Vol. 49, 3, doi.org/10.1122/1.1879043, (2005).

Dilhan M. Kalyon, "Letter to the Editor: Comments on the use of rheometers with rough surfaces or surfaces with protrusions", J. Rheology, Vol. 49, (2005).

C. Feger, J. Gelorme, M. McGlashan-Powell, and D. M. Kalyon, "Mixing, Rheology, and Stability of Highly Filled Thermal Pastes", IBM Journal of Research and Development, Vol. 49, 4/5, 699-707, (2005).

M. Erol and D. M. Kalyon, "Assessment of the Degree of Mixedness of Filled Polymers: Effects of Processing Histories in Batch Mixer and Co-Rotating and Counter-rotating Twin Screw Extruders", International Polymer Processing, Vol. 20, 228-237, (2005).

M. Malik and D. Kalyon,, "Three-dimensional Finite Element Simulation of Processing of Generalized Newtonian Fluids in Counter-rotating and Tangential Twin Screw Extruder and Die Combination", International Polymer Processing, Vol. 20, 398- 409, (2005).

U. Olgun and D. Kalyon, "Use of molecular dynamics to investigate polymer melt-metal wall interactions", Polymer, Vol. 46, 9423-9433, (2005).

Hangsong S. Tang, Dilhan M. Kalyon, "Estimation of the parameters of Herschel-Bulkley fluid under wall slip using a combination of capillary and squeeze flow viscometers", Rheol Acta, Vol. 43, 80-88, (2004).

D.M. Kalyon, H.Gevgilili, A.Shah, "Detachment of the Polymer Melt from the Roll Surface: Calendering Analysis and Data from a Shear Roll Extruder", International Polymer Processing, Vol. XIX, Issue 2, 129-138, (2004).

Dilhan M. Kalyon and Rahmi Yazici, "Method and Apparatus for X-ray Analysis of Particle Size (XAPS)", U.S. Patent and Trademark Office, U.S. Patent # 6,751,287, (2004).

Ali Arslantas, Walter C. Ermler, Rahmi Yazici, Dilhan M. Kalyon, "Crystal Habit Modification of Vitamin C (L-Ascorbic Acid) due to Solvent Effects", Turk J. Chem., Vol. 28, 255-270, (2004).

Dilhan M.Kalyon, Halil Gevgilili, Rahmi Yazici, Albert J. Post, Gregory J. McFann, "Flow and Structure Development Behavior of Bar Soaps Containing Synthetic Detergent", Rheol Acta, Vol. 43, 396-405, (2004).

Guangyu Lu, Dilhan M. Kalyon, Iskender Yilgor, and Emel Yilgor, "Rheology and Processing of BaSO4-Filled Medical-Grade Thermoplastic Polyurethane", Polymer Engineering and Science, Vol. 44, 1941-48, (2004).

Alan H. Wagner, Dilhan M. Kalyon, Rahmi Yazici and Thomas J. Fiske, "Uniaxial Extensional Flow Behavior of a Glass Fiber-Filled Engineering Plastic", Journal of Reinforced Plastics and Composites, Vol. 22, No. 4/2003, 327-337, (2003).

B.Greenberg, D. Kalyon, M.Erol, M.Mezger, E. Heider, P.Redner, S. Nicolich, K. Lee and Scott Lusk., "Structural Analysis of Slurry-Coated CL-20 (PAX-12) Granules Using a Novel Grazing Incidence X-ray Diffraction Method", Proceedings of JANNAF 31st, Propellant Development and Characterization Meeting, 25-27 March, 2003, Charlottsville, VA, (2003).

S. Prickett, C. Murphy, C. Gonzalez, W.Thomas, D. Kalyon, E. Birinci and H. Gevgilili, "Shear Viscosity, Extrudate Swell and Wall Slip Behavior of a Double Base Propellant", Proceedings of JANNAF 31st, Propellant Development and Characterization Meeting, 25-27 March, 2003, Charlottsville, VA, (2003).

D.Kalyon and H. Gevgilili, "Wall Slip and Extrudate Distortion of Three Polymer Melts", Journal of Rheology, Vol. 47, No.3, 683-699, (2003).

G. Lu, D. Kalyon, I. Yilgor and E. Yilgor, "Co-extrusion of TPU and BaSO4 Filled Medical-Grade TPU", SPE ANTEC Technical Papers, 2557-2560, (2003).

G. Lu, D. Kalyon, I. Yilgor and E. Yilgor, "Extrusion of BaSO4 Filled Medical-Grade Thermoplastic Polyurethane", SPE ANTEC Technical Papers, 273-277, (2003).

Dilhan M. Kalyon, Elvan Birinci and Halil Gevgili, "Development of Extrusion Instabilities and Surface Irregularities of Extrudates of Polymer Melts and Filled Polymers", AIChE Annual Meeting, San Francisco, CA, 90C, 37, (2003).

Dilhan M. Kalyon, "Twin Screw Extrusion Processing of Energectic Materials", AIChE Annual Meeting, San Francisco, CA, 59C, 25, (2003).

Guangyu Lu, Dilhan M. Kalyon, Iskender Yilgor, and Emel Yilgor, "Rheology and Extrusion of Medical-Grade Thermoplastic Polyurethane", Polymer Engineering and Science, Vol. 43, 1863-1877, (2003).

Dilhan M. Kalyon, "Letter to the Editor: Comments on "A New Method of Processing Capillary Viscometry Data in the Presence of Wall Slip", Journal of Rheology, Vol. Vol. 47(4), 1087-1088, (2003).

Berton L. Greenberg, Dilhan M. Kalyon, Melek Erol, "Analysis of Slurry-Coating Effectiveness of CL-20 Using Grazing Incidence X-ray Diffraction", Journal of Energetic Materials, Vol. 21, 185-199, (2003).

H.Gevgilili and D.M.Kalyon, "Catastrophic Failure of the No-slip Condition at the Wall during Torsional Flows and Development of Gross Surface Irregularities during Capillary flow of three Polymers", Society of Plastics Engineers ANTEC Technical Papers, Vol. 1, 1019-1023, (2002).

D.M.Kalyon and H.Gevgilili, "Effect of Wall Slip of Polymer Melts on their Relaxation Modulus Behavior", Society of Plastics Engineers ANTEC Technical Papers, Vol. 1, 1004-1007, (2002).

D.M.Kalyon and E.Birinci, "Electrical Conductivity of a Graphite based Composite as affected by the degree of mixedness of Graphite in the Elastomeric Matrix", Society of Plastics Engineers ANTEC Technical Papers, Vol. 2, 1716-1720, (2002).

D.M.Kalyon, E.Birinci, R.Yazici, B.Karuv, and S.Walsh, "Electrical Properties of Composites as Affected by the Degree of Mixedness of the Conductive Filler in the Polymer Matrix", Polymer Engineering & Science, Vol. 42, 1609-1617, (2002).

H. Gevgilili and D.M. Kalyon, "Step strain flow: wall slip effects and other error sources", Journal of Rheology, Vol. 45 (2), March/April, 467-475, (2001).

D.M.Kalyon, "Continuous Processing of Energetic Materials", Proceedings of the 2001 Continuous Mixer and Extruder Users' Group Meeting, (2001).

D.M.Kalyon, "New Developments in Rheological Characterization of Energetic Materials", Proceedings of the 2001 Continuous Mixer and Extruder Users' Group Meeting, (2001).

R. Schefflan, D. Kalyon, S. Kovenklioglu, "Modeling of Aluminum Nanoparticle Formation", 199th Meeting of the Electrochemical Society on March 27, 2001, (2001).

M. Allende and D. M. Kalyon, "Assessment of Particle migration Effects in Pressure-driven Viscometric Flows", Journal of Rheology, Vol. 44, 1, 79-90, (2000).

A. Lawal and D. M. Kalyon, "Compressive squeeze flow of generalized Newtonian Fluids with apparent wall slip", International Polymer Processing, Vol. 15, 1, 63-71, (2000).

D. M. Kalyon, A. Lawal, R. Yazici, P. Yaras and S. Railkar, "Mathematical Modeling and Experimental Studies of Twin Screw Extrusion of Filled Polymers", Polymer and Engineering Science, Vol. 39, 1139-1151, (1999).

R. Yazici, B. Karuv, E. Birinci and D. M. Kalyon, "Particulate based conductive composites exploiting percolation-range microstructure", SPE ANTEC Technical Papers, Vol. 45, 1551-1555, (1999).

M. Rege, S. Kovenklioglu, R. Yazici, D. M. Kalyon and E. Birinci, "Elastomeric coating of filler powders by slurry precipitation", SPE ANTEC Technical Papers, Vol. 45, 3489-3494, (1999).

M. Allende and D. Kalyon, "Assessment of particle migration effects in capillary rheometry of filled polymers", SPE ANTEC Technical Papers, Vol. 45, 1130-1137, (1999).

A. Lawal and D. Kalyon, "Squeeze flow rheometer", SPE ANTEC Technical Papers, Vol. 45, 1120-1125, (1999).

E. Kucukpinar, D. Kalyon and P. Tong, "Viscoelasticity of polyethylenes produced with single-site metallocene catalysis", SPE ANTEC Technical Papers, Vol. 45, 1195-1200, (1999).

A. Lawal, S. Railkar and D. Kalyon, "3-D analysis of fully flighted screws of co-rotating twin screw extruders", SPE ANTEC Technical Papers, Vol. 45, 317-322, (1999).

D. M. Kalyon, S. Railkar and A. Lawal, "New Techniques for the Simulation of the Die and Twin Screw Extrusion Processing of Energetic Materials", JOCG, Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, 14-39, (1999).

A. Lawal and D. M. Kalyon, "Analysis of non-isothermal screw extrusion processing of viscoplastic fluids with significant backflow", Chemical Engineering Science, Vol. 54, 999-1013, (1999).

E.Birinci, R.Yazici, D.M.Kalyon, M.Michienzi, C.Murphy and R.Muscato, "Statistics of Mixing Distributions in Filled Elastomers Processed by Twin Screw Extrusion", SPE ANTEC Technical Papers, Vol. 45, (1999).

A.Lawal, S.Railkar and D.M.Kalyon, "Mathematical Modeling of Three-Dimensional Die Flows of Viscoplastic Fluids with Wall Slip", SPE ANTEC Technical Papers, Vol. 45, (1999).

J. E. Kowalczyk and D. M. Kalyon, "Simulation Based Design and Manufacture of Screws and Dies for the Energetics Industry", JOCG,Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, 40-60, (1999).

R. Yazici and D. M. Kalyon, "On-Line and Off-line Analysis of the Extruded and Cast Energetic Materials for Microstructural Distributions", JOCG,Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, 61-69, (1999).

M. Gallant, W. Newton, S. Johnson, S. Prickett, D. M. Kalyon, A. Lawal and S. Railkar, "Twin Screw Processing of GEM Gun Propellant", JOCG,Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, 88-96, (1999).

D. M. Kalyon, B. Karuv and J. Garrow, "New Squeeze Flow Rheometer for the Rheological Characterization of Energetic Materials", JOCG,Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, 97-110, (1999).

T. Fiske, H. S. Gokturk, R. Yazici and D. M. Kalyon, "Relative Magnetic Permeability of Injection Molded Composites as Affected from the Flow Induced Orientation of Ferromagnetic Particles", Imaging and Image Analysis Applications for Plastics, 135-143, (1999).

H. Suwardie, R. Yazici, D. M. Kalyon and S. Kovenklioglu, "Capillary Flow Behavior of Microcrystalline Vax and Silicon Carbide Suspension", Journal of Materials Science, 5059-5067, (1998).

D. M. Kalyon, "Use of Simulation in Design and Optimization of continuous Processing of Energetic Materials", DMI/TACOM/TARDECConference Proceedings, (1998).

R.Yazici, D.Kalyon and D. Fair, "Microstructure and Mixing Distribution Analysis in M30 Triple-Base Propellants", ARDEC INFORMATION RESEARCH CENTER, ARWEC CR 98015, (1998).

A. Lawal and D. Kalyon, "Squeezing Flow of Viscoplastic Fluids Subject to Wallslip", Polymer Engineering and Science, Vol. 38, 1793-1804, (1998).

R. Yazici and D. M. Kalyon, "Quantitative Characterization of Defect Density Distribution in CL-20 Crystals", Proceedings of 1998 Joint Army, Navy, NASA and Air Force propellant and characterization meeting, Vol. 1, 167-171, (1998).

R. Yazici and D. M. Kalyon, "Quantitative measurement of mixing quality of Gun propellant grains", Proceedings of 1998 Joint Army, Navy, NASA and Air Force propellant and characterization meeting, 59-65, (1998).

S. Kovenklioglu, R. Yazici and D. M. Kalyon, "Environmentally acceptable solvent systems for CL-20 processing", Proceedings of 1998 Joint Army, Navy, NASA and Air Force propellant and characterization meeting, 79-82, (1998).

A. Lawal and D. M. Kalyon, "Viscous heating in non-isothermal die flow of viscoplastic fluids with wall slip", Proceedings of Polymer Processing Society North American Meeting, 163-165, (1998).

M. Akbulut, W. C. Ermler and D. M. Kalyon, "Ab Initio Cluster Model Study of Polymer-Metal Interactions", Computational and Theoretical Polymer Science, Vol. 7, 2, 75-80, (1997).

A. Lawal and D. M. Kalyon, "Non-Isothermal Extrusion Flow of Viscoplastic Fluids with Wall Slip", International Journal of Heat and Mass Transfer, Vol. 40, 16, 3883-3897, (1997).

T. Fiske, H. Gokturk and D. M. Kalyon, "Enhancement of the Relative Magnetic Permeability of Polymeric Composites with Hybrid Particulate Fillers", Journal of Applied Polymer Science, Vol. 65, 1371-1377, (1997).

T. Fiske, H. Gokturk and D. M. Kalyon, "Percolation in Magnetic Composites", Journal of Material Science, Vol. 32, 5551-5560, (1997).

A. Lawal and D. M. Kalyon, "Viscous Heating in Nonisothermal Die Flows of Viscoplastic Fluids with Wall Slip", Chemical Engineering Science, Vol. 52, 8, 1323-1337, (1997).

A. Lawal, S. Railkar and D. M. Kalyon, "A New Approach to Simulation of Die Flow which incorporates the Extruder and the Rotating Screw Tips in the Analysis", International Polymer Processing, Vol. 12, 2, 123-135, (1997).

B. K. Aral and D. M. Kalyon, "Viscoelastic Material Functions of Noncolloidal Suspensions with Spherical Particles", Journal of Rheology, Vol. 41, 3, 599-620, (1997).

Z. Cao, S. Kovenklioglu, D. M. Kalyon and R. Yazici, "Dissolution Study of BAMO/AMMO Thermoplastic Elastomers for the Recycling and Recovery of Energetic Materials", Journal of Energetic Materials, Vol. 15, 73-107, (1997).

Z. Cao, S. Kovenklioglu, D. M. Kalyon and R. Yazici, "Experimental Investigation and Modeling of Dissolution of Polymers and Filled Polymers", Polymer Engineering and Science, 90-100, (1997).

T. Fiske, H. S. Gokturk, R. Yazici and D. M. Kalyon, "Relative Magnetic Permeability of Injection Molded Composites as Affected from the Flow Induced Orientation of Ferromagnetic Particles", SPE ANTEC Technical Papers, Vol. 43, 1482-1486, (1997).

R. E. Kucukpinar and D. M. Kalyon, "Viscoelasticity and Processability of a BAMO/AMMO Thermoplastic Elastomer", SPE ANTEC Technical Papers, Vol. 43, 3411-3417, (1997).

T. Fiske, H. S. Gokturk, R. Yazici and D. M. Kalyon, "Effects of Flow Induced Orientation of Ferromagnetic Particles on Relative Magnetic Permeability of Injection Molded Composites", Polymer Engineering and Science, Vol. 37, 826-837, (1997).

A.H. Wagner, D. M. Kalyon, R. Yazici and T. J. Fiske, "Extensional Flow of Engineering Plastics with Glass Fibers", SPE ANTEC Technical Papers, Vol. 43, 996-1000, (1997).

R. Yazici and D.M. Kalyon, "Analysis of Degree of Mixing in Filled Polymers by Wide-Angle x-ray Diffraction", SPE ANTEC Technical Papers, Vol. 43, 2076-2080, (1997).

D. M. Kalyon, H. Gokturk and I. Boz, "An Adjustable Gap In-Line Rheometer", SPE ANTEC Technical Papers, Vol. 43, 2283-2288, (1997).

Z. Cao, S. Kovenklioglu, R. Yazici and D. M. Kalyon, "Dissolution Rates of Oxetane Thermoplastic Elastomer for Dissolution Based Recycling of Elastomeric Formulations", SPE ANTEC Technical Papers, Vol. 43, 3104-3108, (1997).

S. E. Prickett, W. Ansley, D. M. Kalyon and S. Railkar, "Characterization of the Temperature-Dependent Shear Viscosity Material Function of AA-6 Propellant", Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, (1997).

D. M. Kalyon, S. Railkar,M. Michienzi and C.M. Murphy, "Die Design for Twin Screw Extruded Composite Propellant Grain", Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, (1997).

M.A. Michienzi, C.M. Murphy, D. M. Kalyon and S. Railkar, "Wall Slip and Capillary Flow Behavior of Extrudable Composite Propellant", Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, (1997).

D. M. Kalyon, S. Railkar, S.E. Prickett, M.A. Michienzi, C.M. Murphy and F. M. Gallant, "Capillary and On-Line Slit Rheometry of an HE LOVA Gun Propellant Formulation", Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, (1997).

D. Kalyon, S. Railkar, H. Gokturk, I. Boz, N. Boz and R. Guy, "Twin Screw Extrusion Processing of Extrudable Composite Propellant Simulant", Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, (1997).

R. Yazici and D. M. Kalyon, "Quantitative Characterization of Degree of Mixedness of LOVA Grains", Journal of Energetic Materials, Vol. 14, 1, 57-73, (1996).

A. Wagner and D. M. Kalyon, "Parison Formation and Inflation of Polyamides in Blow Molding", Society of Plastics Engineers ANTEC Technical Papers, Vol. 42, 953-957, (1996).

T. Fiske, H. Gokturk and D. M. Kalyon, "Relative Magnetic Permeability of Polymeric Composites with Hybrid Particulate Fillers", Society of Plastics Engineers ANTEC Technical Papers, Vol. 42, 1768-1772, (1996).

T. Fiske, A. Wagner, R. Yazici and D. M. Kalyon, "Uniaxial Extensional Flow Behavior of Fiber Filled Suspensions as Affected by Fiber Aspect Ratio and Concentration", Society of Plastics Engineers ANTEC Technical Papers, Vol. 42, 1134-1138, (1996).

A. Lawal, S. Railkar, P. Yaras and D. M. Kalyon, "Twin Screw Extrusion Processing of Filled Polymers", Society of Plastics Engineers ANTEC Technical Papers, Vol. 42, 381-385, (1996).

A. Lawal, S. Railkar and D. M. Kalyon, "Coupled Simulation of Die and Extrusion Flows Using Three-Dimensional Finite Element Method", Society of Plastics Engineers ANTEC Technical Papers, Vol. 42, 155-159, (1996).

A. Wagner, D. M. Kalyon and V. Tan, "Microstructural Distributions in Extrusion Blow Molded Semicrystalline Resins", Society of Plastics Engineers ANTEC Technical Papers, Vol. 42, selected as the best paper of Blow Molding Division, 7195-2199, (1996).

A. Wagner and D. M. Kalyon, "Parison Formation and Inflation Behavior of Polyamide-6 During Extrusion Blow Molding", Polymer Engineering and Science, Vol. 36, 14, 1897-1906, (1996).

A. Wagner, R. Yazici and D.M. Kalyon, "Extrudate Swell Behavior of a Fiber Filled Polyamide 6", Polymer Composites, Vol. 17, 6, 840-849, (1996).

A. Lawal, S. Railkar, P. Yaras and D. M. Kalyon, "Pressurization and Heat Transfer During Twin Screw Extrusion Processing of Concentrated Suspensions", Journal of Materials Processing and Manufacturing Science, Vol. 5, 57-78, (1996).

M. Mickienzi, C. Murphy and D. M. Kalyon, "Using Instrumented Capillary Dies to Characterize the Rheological Behavior of Extruded Composite Propellant", Proceedings of JANNAF Conference, April, (1996).

R. Yazici, D. M. Kalyon and D. Fair, "Degree of Mixing Analysis in LOVA Propellants by Wide-Angle x-Ray Diffraction", US Army Report, ARPBM-CR-95001, Vol. April, 33 pages, (1996).

D.M. Kalyon and S. Kovenklioglu, "Disposal Method and Apparatus for Highly Toxic Chemicals by Chemical Neutralization and Encapsulation", U.S. Patent and Trademark Office, U.S. Patent # 5,584,071, (1996).

A. Lawal and D. M. Kalyon, "Mechanisms of Mixing in Single and Co-rotating Twin Screw Extruders", Polymer Engineering and Science, Vol. 35, 17 Mid-September Issue, 1325-1338, (1995).

A. Lawal and D. M. Kalyon, "Simulation of the Intensity of Segregation Distributions Using Three-Dimensional FEM Analysis: Application to Co-rotating Twin Screw Extrusion Processing", Journal of Applied Polymer Science, Vol. 58, 1501-1507, (1995).

B. Aral and D. M. Kalyon, "Rheology and Extrudability of Very Concentrated Suspensions: Effects of Vacuum Imposition", Plastics Rubber and Composites Processing and Applications, Vol. 24, 201-210, (1995).

D. M. Kalyon, H. Gokturk, P. Yaras and B. Aral, "Motion Analysis of Development of Wall Slip During Die Flow of Concentrated Suspensions", Society of Plastics Engineers ANTEC Technical Papers, Vol. 41, 1130-1134, (1995).

D. M. Kalyon, "Characterizing high-solid suspensions", ChemTech, Vol. 25, 5, 22-30, (1995).

D. M. Kalyon, "A Report on Highly Filled Materials and the Activities of the Highly Filled Materials Institute at Stevens Institute of Technology", Bulletin of the British Society of Rheology, Vol. 38, 1, 12, (1995).

D. M. Kalyon and S. Kovenklioglu, "Disposal of Chemical Munitions using Concomitant Neutralization, Gelation and Encapsulation", Proceedings of the Symposium on Alternatives to Incineration for Disposal of Chemical Munitions and Energetics, Stevens Institute of Technology, Hoboken, NJ, June 5-6, (1995).

D.M. Kalyon and S. Kovenklioglu, "Disposal of Chemical Munitions Using Concomitant Neturalization, Gelation and Encapsulation", Journal of Energetic Materials, Vol. 13, 3-4, 165-183, (1995).

D.M. Kalyon, H.S. Gokturk, S. Railkar, "Electric Power Transmission System and Method of Asymmetric Transmission of Power to Mitigate Magnetic Fields", U.S. Patent and Trademark Office, U.S. Patent # 5,391,929, (1995).

D. M. Kalyon, Y. N. Chiou, S. Kovenklioglu and A. Bouaffar, "High Pressure Polymerization of Ethylene and Rheological Behavior of Polyethylene Product", Polymer Engineering and Science, Vol. 34, 10, 804-814, (1994).

P. Yaras, D. M. Kalyon, and U. Yilmazer, "Flow Instabilities in Capillary Flow of Concentrated Suspensions", Rheologica Acta, Vol. 33, 48-59, (1994).

A. Lawal and D. M. Kalyon, "Non-isothermal Model of Single Screw Extrusion of Generalized Newtonian Fluids", Numerical Heat Transfer, Vol. 26, 1, 103-121, (1994).

A. Lawal and D. M. Kalyon, "Single Screw Extrusion of Viscoplastic Fluids Subject to Different Slip Coefficients at Screw and Barrel Surfaces", Polymer Engineering and Science, Vol. 34, Mid-October Issue, 1471-1479, (1994).

B. Aral and D. M. Kalyon, "Effects of Temperature and Surface Roughness on Time-Dependent Development of Wall Slip in Torsional Flow of Concentrated Suspensions", Journal of Rheology, Vol. 38, 4, 957-972, (1994).

T. Fiske, S. Railkar and D. M. Kalyon, "Effects of Segregation on the Packing of Spherical and Non-Spherical Particles", Powder Technology, Vol. 81, 57-64, (1994).

R. Yazici, A. Wagner, D. M. Kalyon and S. B. Han, "Extrudate Swell Behavior of Engineering Plastics Reinforced with Glass Fibers", Society of Plastics Engineers ANTEC Technical Papers, Vol. 40, 1172-1174, (1994).

D.M. Kalyon, H.S. Gokturk, "A Method and Apparatus for Mitigation of Magnetic Fields from Frequency Magnetic Field Sources", U.S. Patent and Trademark Office, Vol. U.S Patent # 5,365,115, (1994).

D.M. Kalyon and H.S. Gokturk, "Adjustable Gap Rheometer", U.S. Patent and Trademark Office, Vol. U.S. Patent # 5,277,058, (1994).

A. Lawal, D. M. Kalyon, and Z. Ji, "Computational Study of Chaotic Mixing in Co-Rotating Two-Tipped Kneading Paddles: Two-Dimensional Approach", Polymer Engineering and Science, Vol. 33, 3, 140-148, (1993).

A. Lawal and D. M. Kalyon, "Three Dimensional Analysis of Co-rotating Twin Screw Extrusion Using Tools of Dynamics", Society of Plastics Engineers ANTEC Technical Papers, Vol. 39, 3397-3400, (1993).

A. Lawal and D. M. Kalyon, "Extrusion of Viscoplastic Fluids Subject to Different Slip Coefficients at Screw and Barrel Surfaces", Society of Plastics Engineers ANTEC Technical Papers, Vol. 39, 2782-2785, (1993).

R. Yazici and D. M. Kalyon, "Characterization of Degree of Mixing of Concentrated Suspensions", Society of Plastics Engineers ANTEC Technical Papers, Vol. 39, 2845-2850, (1993).

B. Aral and D. M. Kalyon, "Time-Dependent Development of Wall Slip in Shear Flows of Concentrated Suspensions", Society of Plastics Engineers ANTEC Technical Papers, Vol. 39, 2607-2610, (1993).

H. Gokturk, T. Fiske and D. M. Kalyon, "Dielectric Properties of Polyethylene-Stainless Steel Fiber Composites", Society of Plastics Engineers ANTEC Technical Papers, Vol. 39, 605-608, (1993).

P. Yaras, U. Yilmazer and D. M. Kalyon, "Unstable Flow of Concentrated Suspensions in Tube Flow", Society of Plastics Engineers ANTEC Technical Papers, Vol. 39, 2604-2606, (1993).

A. H. Wagner and D. M. Kalyon, "Extrudate Swell, Rheological Behavior and Parison Formation of Blow Molding Grade Engineering Resins", Society of Plastics Engineers ANTEC Technical Papers, Vol. 39, 1878-1884, (1993).

T. Fiske, H. Gokturk and D. M. Kalyon, "Electric and Magnetic Properties of Low Density Polyethylene Filled with Ferromagnetic Powders", Society of Plastics Engineers ANTEC Technical Papers, Vol. 39, 614-617, (1993).

D. M. Kalyon, P. Yaras, B. Aral and U. Yilmazer, "Rheological Behavior of Concentrated Suspensions: A Solid Rocket Fuel Simulant", Journal of Rheology, Vol. 37, 35-53, (1993).

J. S. Sun, H. S. Gokturk and D. M. Kalyon, "Volume and Surface Resistivity of Low Density Polyethylene Filled with Stainless Steel Fibres", Journal of Materials Science, Vol. 28, 364-366, (1993).

D. M. Kalyon, R. Yazici and A. Lawal, "Techniques to Analyze Degree of Mixing of Concentrated Suspensions and Simulation of Mixing Flows", Proceedings of 1993 JANNAF Propellant Development and Characterization Subcommittee Meeting, Livermore, CA, April 28, (1993).

D. M. Kalyon, U. Yilmazer, B. Aral and P. Yaras, "Rheological Behavior of Solid Rocket Fuel Simulants", Proceedings of 1993 JANNAF Propellant Development and Characterization Subcommittee Meeting, Livermore, CA, April 29, 225-234, (1993).

H. Gokturk, T. Fiske and D. M. Kalyon, "Granular Magnetic Composites Employing Cobalt Based Amorphous Alloys in a Polymeric Host", Journal of Applied Physics, Vol. 73, 10, 5598-5600, (1993).

D. M. Kalyon, "Review of Factors Affecting the Continuous Processing and Manufacturability of Highly Filled Suspensions", Journal of Materials Processing and Manufacturing Science, Vol. 2, 159-187, (1993).

A. Lawal, D. M. Kalyon and U. Yilmazer, "Extrusion and Lubrication Flows of Viscoplastic Fluids with Wall Slip", Chemical Engineering Communications, Vol. 122, 127-151, (1993).

Y. Chen, D. M. Kalyon and E. Bayramli, "Effects of Surface Roughness and the Chemical Structure of Materials of Construction on Wall Slip Behavior of Linear Low Density Polyethylene in Capillary Flow", Journal of Applied Polymer Science, Vol. 50, 7, 1169-1177, (1993).

R. Yazici and D. M. Kalyon, "Degree of Mixing Analyses of Concentrated Suspensions by Electron Probe and X-Ray Diffraction", Rubber Chemistry and Technology, Vol. 66, 4, 527-537, (1993).

H. Gokturk, T. Fiske and D. M. Kalyon, "Effects of Particle Shape and Size Distributions on the Electrical and Magnetic Properties of Nickel/Polyethylene Composites", Journal of Applied Polymer Science, Vol. 50, 1891-1901, (1993).

H. Gokturk, T. Fiske and D. M. Kalyon, "Electric and Magnetic Properties of a Thermoplastic Elastomer Incorporated with Ferromagnetic Powders", IEEE Transactions on Magnetics, Vol. 29, 6, 4170-4176, (1993).

S. B. Railkar, H. Gokturk and D. M. Kalyon, "Development of Mathematical Tools to Determine Optimum Enclosure Designs for Controlling Electromagnetic Fields", Journal of Reinforced Plastics and Composites, Vol. 12, 1212-1220, (1993).

J. S. Yu, A. H. Wagner and D. M. Kalyon, "Simulation of the Microstructure Development in Injection Molding of Engineering Plastics", Journal of Applied Polymer Science, Vol. 44, 477-489, (1992).

Y. Chen, D. M. Kalyon and E. Bayramli, "Wall Slip Behavior of Linear Low Density Polyethylene in Capillary Flow: Effects of Materials of Construction and Surface Roughness", Society of Plastics Engineers ANTEC Technical Papers, Vol. 38, 1747-1751, (1992).

B. Aral, D. M. Kalyon and H. Gokturk, "The Effects of Air Incorporation in Concentrated Suspension Rheology", Society of Plastics Engineers ANTEC Technical Papers, Vol. 38, 2448-2451, (1992).

H. Gokturk, T. Fiske and D. M. Kalyon, "Electric and Magnetic Properties of Low Density Polyethylene Filled with Nickel Powders, Fibers, and Flakes", Society of Plastics Engineers ANTEC Technical Papers, Vol. 38, 491-494, (1992).

S. Railkar, H. Gokturk and D. M. Kalyon, "Development of Mathematical Tools to Determine Optimum Enclosure Designs for Controlling Electromagnetic Fields", Society of Plastics Engineers ANTEC Technical Papers, Vol. 38, 488-490, (1992).

Z. Ji and D. M. Kalyon, "Two Dimensional Computational Study of Chaotic Mixing in Two-tipped Kneading Paddles of Co-rotating Twin Screw Extruders", Society of Plastics Engineers ANTEC Technical Papers, Vol. 38, 1323-1327, (1992).

A. Lawal and D. M. Kalyon, "A Non-isothermal Model of Single Screw Extrusion Processing of Viscoplastic Materials Subject to Wall Slip", Society of Plastics Engineers ANTEC Technical Papers, Vol. 38, 2158-2161, (1992).

A. Lawal and D. M. Kalyon, "Incorporation of Wall Slip in Non-isothermal Modeling of Single Screw Extrusion Processing", Proceedings of the First International Conference on Transport Phenomena in Processing, S. Guceri, ed., Technomic Publ. Co, 985-996, (1992).

D. M. Kalyon, "Simulation of Contiuous Processing of Highly Filled Suspensions", Proceedings of Joint Ordnance Commanders Group, 6th Annual Meeting of the Continuous Extruder and Mixer Users Group, sponsored by US Army and Navy, Phoenix, AZ, November, (1992).

D. M. Kalyon, "Rheological Behavior of Highly Filled Suspensions", Proceedings of Joint Ordnance Commanders Group, 6th Annual Meeting of the Continuous Extruder and Mixer Users Group, sponsored by US Army and Navy, Phoenix, AZ, November, (1992).

U. Yilmazer and D. M. Kalyon, "The Role of Interface at the Wall in Flow of Concentrated Composites", The Interfacial Interactions in Polymeric Composites, NATO Advanced Study Institute, G. Akovali, ed., Antalya, Turkey, (1992).

J. Yu and D. M. Kalyon, "Development of Density Distributions in Injection Molded Amorphous Engineering Plastics, Part II,", Polymer Engineering and Science, Vol. 31, 3, 153-160, (1991).

J. Yu, M. Lim and D. M. Kalyon, "Development of Density Distributions in Injection Molded Amorphous Engineering Plastics, Part I,", Polymer Engineering and Science, Vol. 31, 3, 145-152, (1991).

D. Kalyon, H. Suwardie and S. Kovenklioglu, "Thermal Behavior and Curing Kinetics of Poly(carbosilane),", Journal of Applied Polymer Science, Vol. 42, 1087-1095, (1991).

J. S. Yu and D. M. Kalyon, "Microstructure Development in Blow Molded Amorphous Engineering Plastics,", Plastics Rubber and Composites Processing and Applications, Vol. 15, 95-101, (1991).

U. Yilmazer and D. M. Kalyon, "Dilatancy of Concentrated Suspensions with Newtonian Matrices", Polymer Composites, Vol. 12, 4, 226-232, (1991).

A. H. Wagner and D. M. Kalyon, "Development of Cracks in Injection Moldings of Poly(2,6-Dimethyl-1,4 Phenylene Ether)", Polymer Engineering and Science, Vol. 31, 1393-1399, (1991).

D. M. Kalyon, C. Jacob and P. Yaras, "An Experimental Study of the Degree of Fill and Melt Densification in Fully-intermeshing, Co-rotating Twin Screw Extruders,", Plastics, Rubber and Composites Processing and Applications, Vol. 16, 3, 193-200, (1991).

D. M. Kalyon, R. Yazici, C. Jacob, B. Aral and S. W. Sinton, "Effects of Air Entrainment on the Rheology of Concentrated Suspensions during Continuous Processing", Polymer Engineering and Science, Vol. 31, 1386-1392, (1991).

H.Yao, S.Kovenklioglu and D.M.Kalyon, "Conversion of Polymeric Precursors into Ceramics:Pore Formation", High performance composites for the 1990's, S.K.Das, C.P.Ballard, F.Marikar,eds TMS Publications, 377-387, (1991).

D.M.Kalyon, "Polymer Processing", Enclycopedia of Chemical Processing and Design, Vol. 39, Marcel Dekker, (1991).

D. M. Kalyon and J. Yu, "Microstructure Development in Blow Molded Engineering Plastics", Society of Plastics Engineers ANTEC Technical Papers, Vol. 36, 768-772, (1990).

Z. Ji, A. Gotsis and D. M. Kalyon, "Single Screw Extrusion Processing of Highly Filled Suspensions Including Wall Slip", Society of Plastics Engineers, ANTEC Technical Papers, Vol. 36, 160-163, (1990).

A. D. Gotsis, Z. Ji and D. M. Kalyon, "3-D Analysis of the Flow in Co-rotating Twin Screw Extruders", Society of Plastics Engineers, ANTEC Technical Papers, Vol. 36, 139-142, (1990).

D. M. Kalyon and A. H. Wagner, "Formation of Cracks in Injection Molded Amorphous Engineering Plastics", Society of Plastics Engineers, ANTEC Technical Papers, Vol. 36, 1468-1472, (1990).

J. S. Yu, M. Lim and D. M. Kalyon, "Characterization and Simulation of Density Distributions in Injection Molded Amorphous Engineering Plastics", Society of Plastics Engineers, ANTEC Technical Papers, Vol. 36, 313-317, (1990).

H. Yao, H. Suwardie, D. M. Kalyon and S. Kovenklioglu, "Conversion of Poly(carbosilane) to Silicon Carbide: Thermal Characterization, Curing and Pore Formation", Society of Plastics Engineers, ANTEC Technical Papers, Vol. 36, 538-541, (1990).

J. W. Sinton, J. C. Crowley, G. A. Lo, D. M. Kalyon and C. Jacob, "Nuclear Magnetic Resonance Imaging Studies of Mixing in Twin Screw Extruders", Society of Plastics Engineers, ANTEC Technical Papers, Vol. 36, 116-119, (1990).

D. M. Kalyon, B. Aral and U. Yilmazer, "Rheological Behavior of Highly Filled Suspensions", Society of Plastics Engineers, ANTEC Technical Papers, Vol. 36, 1560-1564, (1990).

D. M. Kalyon and D. Czerwonka, "Uniaxial Extensional Flow of Film Blowing Grade Polyethylenes in the Very Low to High Density Range", Plastics and Rubber Processing and Applications, Vol. 14, 29-33, (1990).

H. Yao, S. Kovenklioglu and D. M. Kalyon, "Pore Formation in the Pyrolysis of Polymers to Ceramics,", Chemical Engineering Communications, Vol. 96, 155-175, (1990).

D.M.Kalyon and U.Yilmazer, "Rheological Behavior of Highly Filled Suspensions which Exhibit Slip at the Wall", Polymer Rheology and Processing, A.Collyer and L.Utracki,eds., Elsevier Applied Science, London, (1990).

D. M. Kalyon and F. Moy, "Ultimate Properties of Blown Films of LLDPE Resins as Affected by Higher Alpha-Olefin Comonomers", Polymer Engineering and Science, Vol. 28, 23, 1551-1558, (1989).

U. Yilmazer and D. M. Kalyon, "Slip Effects in Viscometric Flows of Highly Filled Suspensions", Society of Plastics Engineers ANTEC Technical Papers, Vol. 35, 1682-1686, (1989).

A. H. Wagner, J. S. Yu and D. M. Kalyon, "Orientation and Residual Stress Distributions in Injection Molded Engineering Plastics", Society of Plastics Engineers ANTEC Technical Papers, Vol. 35, 303-307, (1989).

J. S. Yu, D. M. Kalyon and A. H. Wagner, "Simulation of Microstructure Development in Injection Molding of Amorphous Engineering Plastics", Society of Plastics Engineers ANTEC Technical Papers, Vol. 35, 281-285, (1989).

U. Yilmazer, C. G. Gogos and D. M. Kalyon, "Unstable Flows During Compounding of Highly Filled Suspensions", Society of Plastics Engineers ANTEC Technical Papers, Vol. 35, 191-195, (1989).

A. D. Gotsis and D. M. Kalyon, "Simulation of Mixing in Co-rotating Twin Screw Extruders", Society of Plastics Engineers ANTEC Technical Papers, Vol. 35, 44-48, (1989).

D. M. Kalyon and H. N. Sangani, "Characterization of Distributive Mixing in Fully-Intermeshing, Co-rotating Twin Screw Extruders", Society of Plastics Engineers ANTEC Technical Papers, Vol. 35, 124-128, (1989).

D. M. Kalyon and H. Sangani, "An Experimental Study of Distributive Mixing in Fully Intermeshing Co-rotating Twin Screw Extruders", Polymer Engineering and Science, Vol. 29, 15, 1018-1026, (1989).

U. Yilmazer , C. Gogos and D. M. Kalyon, "Mat Formation and Unstable Flows of Highly Filled Suspensions in Capillaries and Continuous Processors", Polymer Composites, Vol. 10, 4, 242-248, (1989).

U. Yilmazer and D. M. Kalyon, "Slip Effects in Capillary and Parallel Disk Torsional Flows of Highly Filled Suspensions", Journal of Rheology, Vol. 33, 8, 1197-1212, (1989).

A. Wagner, J. Yu and D. M. Kalyon, "Injection Molding of Engineering Plastics", Advances in Polymer Technology, Vol. 9, 1, 17-32, (1989).

D.M.Kalyon, "Applications of Continuous Mixers", Handbook of Polymer Science and Technology, Vol. 3, N.P. Cheremisinoff,ed.,Marcel Dekker, 373-419, (1989).

D. M. Kalyon, A. Wagner and S. Dey, "Microstructure Development in Injection Molded Engineering Plastics", Society of Plastics Engineers ANTEC Technical Papers, Vol. 34, 605-608, (1988).

D. M. Kalyon, A. Gotsis, C. Gogos and C. Tsenoglou, "Towards a Better Understanding of Mixing in Co-rotating Twin Screw Extruders", Society of Plastics Engineers ANTEC Technical Papers, Vol. 34, 64-66, (1988).

A. Wagner, J. Yu and D. M. Kalyon, "Microstructure and Ultimate Properties of Injection Molded Amorphous Engineering Plastics: Poly(ether Imide) and Poly (2,6-Dimethyl-1,4-Phenylene Ether)", Polymer Engineering and Science, Vol. 29, 18, 1298-1307, (1988).

D. M. Kalyon, D. Yu and J. Yu, "Rheology and Processing of LLDPE Resins as Affected by Higher Alpha-Olefin Comonomers", Polymer Engineering and Science, Vol. 28, 23, 1542-1550, (1988).

D. M. Kalyon, D. Yu and J. Yu, "Melt Rheology of Two Engineering Plastics: Poly(ether imide) and Poly (2,6-dimethyl-1,4 phenylene ether)", Journal of Rheology, Vol. 32, 8, 789-811, (1988).

D. M. Kalyon, A. Gotsis, C. Gogos and C. Tsenoglou, "Simulation of the Mixing of Highly Filled Suspensions in the Co-rotating Twin Screw Extrusion Process", Innovative Science and Technology Symposium of SPIE, Propulsion, 71-78, (1988).

D. M. Kalyon, A. Gotsis, U. Yilmazer, C. Gogos, H. Sangani, B. Aral and C. Tsenoglou, "Development of Experimental Techniques and Simulation Methods to Analyze Mixing in Co-rotating Twin Screw Extrusion", Advances in Polymer Technology, Vol. 8, 4, 337-353, (1988).

C.Tsenoglou, D.M.Kalyon and C.Gogos, "A viscoelastic Constitutive Relationship in flowing Polymer Suspensions and Composites", Engineering Applications of New composites, Oxon, U.K, (1988).

D.M.Kalyon, "Mixing in continuos Processors", Encyclopedia of Fluid Mechanics, Vol. 7, Chapter28, Gulf Publishing, 887-926, (1988).

D. M. Kalyon, J. Yu and C. Du, "A Distributed Model of Flow in Spiral Mandrel Die", Polymer Process Engineering, Vol. 5, 2, 179-207, (1987).

D. M. Kalyon and M. Khemis, "Role of Slip Additives in Blown Film Extrusion of Low Density Polyethylene", Plastics and Rubber Processing and Applications, Vol. 8, 157-164, (1987).

D. M. Kalyon, "Pressurization and Pumping in Polymer Processing", Chemical Engineering Progress, Vol. June, 48-51, (1987).

D. M. Kalyon, "Melting, Softening and Solidification in Polymer Processing", Chemical Engineering Progress, Vol. June, 45-48, (1987).

D. M. Kalyon, "Handling of Particulate Solids", Chemical Engineering Progress, Vol. June, 42-45, (1987).

D. M. Kalyon and S. Kovenklioglu, "Processability of Organometallic Polymer Precursors for Non-Oxide Ceramic Applications", Advances in Polymer Technology, Vol. 7, 2, 191-199, (1987).

D. M. Kalyon, F. Moy, V. Tan and S. Bhakhuni, "Microstructure Development in the Blown Film Extrusion of Linear Low Density Polyethylenes as Affected by Alpha Olefin Comonomers", Society of Plastics Engineers ANTEC Technical Papers, Vol. 32, 741-744, (1986).

D. M. Kalyon and M. Kamal, "An Experimental Investigation of Capillary Extrudate Swell in Relation to Parison Swell Behavior in Blow Molding", Polymer Engineering and Science, Vol. 26, 7, 504-512, (1986).

D. M. Kalyon, V. Tan, S. Bhakuni and F. Moy, "Microstructure Development in the Blown Film Extrusion of LLDPE's as Affected by Alpha-Olefin Comonomers", Journal of Film and Sheeting, Vol. 2, 310-320, (1986).

D. M. Kalyon and M. Hallouch, "Compounding of Thermosets in Continuous Kneaders", Advances in Polymer Technology, Vol. 6, 3, 237-249, (1986).

D. M. Kalyon and F. Moy, "Blown Film Extrusion of Linear Low Density Polyethylenes: Effects of Alpha-Olefin Comonomers", Society of Plastics Engineers ANTEC Technical Papers, Vol. 31, 680-684, (1985).

D. M. Kalyon and M. Hallouch, "Processability of Thermosets as Affected by Compounding Conditions in Continuous Kneaders", Society of Plastics Engineers ANTEC Technical Papers, Vol. 31, 1206-1211, (1985).

D. M. Kalyon and N. Fares, "Chemorheology and Ultimate Properties of Thermosetting Molding Powders Filled with Recycled Thermosets", Plastics and Rubber Processing and Applications, Vol. 5, 4, 357-362, (1985).

D. M. Kalyon and M. Khemis, "Effects of Slip Additives on the Rheology of LDPE Resins and Ultimate Properties of Blown Films", Society of Plastics Engineers ANTEC Technical Papers, Vol. 30, 136-140, (1984).

D. M. Kalyon, M. Hallouch and N. Fares, "Recycling of Thermosets as Fillers", Society of Plastics Engineers ANTEC Technical Papers, Vol. 30, 640-642, (1984).

M.Kamal and D.M.Kalyon, "Microstructure and Ultimate Properties of Extrusion Blow Model Polyethylene bottles.", Interrelations between Processing, Structure and Properties of Polymeric Materials, Elsevier Science Publishers, Amsterdam, (1984).

D. M. Kalyon and M. Bouazza, "Compounding Thermosetting Molding Powders in Continuous Kneaders", Society of Plastics Engineers ANTEC Technical Papers, Vol. 29, 778-780, (1983).

M. Kamal and D. M. Kalyon, "Heat Transfer and Microstructure in Extrusion Blow Molding", Polymer Engineering and Science, Vol. 23, 9, 503-509, (1983).

M. Kamal, D. M. Kalyon and V. Tan, "Anisotropy and Dimensions of Blow Molded Polyethylene Bottles", Polymer Engineering and Science, Vol. 22, 287-291, (1982).

M. Kamal, D. M. Kalyon and V. Tan, "Distribution of Thickness and Properties in Blow Molded Polyethylene Bottles", Society of Plastics Engineers ANTEC Technical Papers, Vol. 26, 434-435, (1981).

M. Kamal, V. Tan and D. M. Kalyon, "Measurement and Calculation of Parison Dimensions and bottle Thickness Distribution During Blow Molding", Polymer Engineering and Science, Vol. 21, 331-338, (1981).

M. Kamal, D. M. Kalyon and J. Dealy, "An Integrated Experimental Study of the Injection Molding Behaviour of Some Polyethylene Resins", Polymer Engineering and Science, Vol. 20, 17, 1117-1126, (1980).

D. M. Kalyon, M. Kamal and V. Tan, "The Dynamics of Parison Development in Blow Molding", Polymer Engineering and Science, Vol. 20, 773-777, (1980).

M.Kamal, V. Tan and D.M.Kalyon, "Melt Deformation during Parison Formation and Inflation in Extrusion blow molding.", Rheology : Applications, Vol. 3, G. Astarita, G.Marrucci, L.Nicolais. Plenum Press, NewYork, (1980).

D. M. Kalyon, V. Tan and M. Kamal, "Dynamics of Parison Development in Blow Molding", Society of Plastics Engineers ANTEC Technical Papers, Vol. 24, 992-995, (1979).

A. Ergun, X. Yu, A. Valdevit, A. Ritter and D. M. Kalyon, "Radially and axially-graded multi-zonal scaffolds targeting critical-sized bone defects from polycaprolactone/hydroxyapatite/tricalcium phosphate", Tissue Engineering Part A, Vol. 18, 23/24

 

 

Highly Filled Materials Institute
Castle Point on Hudson
Hoboken, NJ 07030
Tel: (201) 216-8225